The Pedestal System
A traditional fixed pedestal construction where the benchtop is mounted directly onto the base units. This is intended to be a “fitted” system using infill panels to close any unused spaces.
Underbench units have a nominal carcase height of 762mm mounted on a 127mm high hardwood plinth. The working height is
nominally 905mm.
Cantilever system
Our cantilever system allows the worktop to be mounted independently of the base units on tubular steel support frames (as illustrated). The removeable underbench units have a carcase height of 724mm fitted with a reduced height hardwood plinth of 95mm. The working height is maintained at a nominal 905mm allowing a mixture of pedestal and cantilever construction types in the same Laboratory.
Modular Supported System
Rigid ‘A’ Frames, interlinked with span rails, support the benchtop independently of the base units. Reduced height units, nominally 610mm high, can be located within the span between the ‘A’ Frames held from underneath on the span rails 200mm above floor level. The working height is nominally 905mm. As an alternative the ‘A’ frame support system can be adapted to use the full height ‘Cantilever’ type removeable underbench unit.
Modular Suspended System
Self supporting ‘C’ frames interlinked with span rails provide support to the benchtop and the underbench units are then suspended from a hanging track located underneath. This system gives the option of having these 610mm high units mounted in a fixed position or able to traverse the bench length. The optional central support core provides the facility to mount a variety of overbench storage options. The working height is nominally 905mm.